S3D

I've been able to build and run S3D on AIX 5.3, Linux (x86_64), and BGL. Though without output confirmation, I can't really say that it's working 100%.

Here's the method I used, I didn't use the harness scripts.

1) Create a make.XXX for your machine in "Source/build". Here's what I've used:

• make.SP2 - (AIX), this is copied from my old S3D installation

COMPILE_F90   = mpxlf95_r -g -O3 -qstrict -qarch=auto -qtune=auto -qsuffix=cpp=f90 -q64
-qrealsize=8 -WF,-Dflush=FLUSH_ -WF,-D$(MACH) -c -o $@
COMPILE_F77   = mpxlf95_r -g -O3 -qstrict -qarch=auto -qtune=auto -qfixed          -q64
-qrealsize=8 -WF,-Dflush=FLUSH_ -WF,-D$(MACH) -c -o $@
LINK =          mpxlf95_r -g -O3 -qstrict -qarch=auto -qtune=auto -qsuffix=cpp=f90 -q64
-qrealsize=8 -WF,-Dflush=FLUSH_ -WF,-D$(MACH) -lesslp2

• make.LINUX (Using OpenMPI 1.0.2 built with icc/ifort)

F90=mpif90 -fpp1
COMPILE_F90  = $(F90) -c -o $@
COMPILE_F77  = $(F90) -c -o $@
COMPILE_C  = icc -c -o $@
LINK         = $(F90)

• make.BGL

COMPILE_F90   = mpixlf90 -g -O3 -qstrict -qarch=auto -qtune=auto -qsuffix=cpp=f90 -q32
-qrealsize=8 -WF,-Dflush=FLUSH_ -WF,-D$(MACH) -c -o $@
COMPILE_F77   = mpixlf90 -g -O3 -qstrict -qarch=auto -qtune=auto -qfixed          -q32
-qrealsize=8 -WF,-Dflush=FLUSH_ -WF,-D$(MACH) -c -o $@
LINK =          mpixlf90 -g -O3 -qstrict -qarch=auto -qtune=auto -qsuffix=cpp=f90 -q32
-qrealsize=8 -WF,-Dflush=FLUSH_ -WF,-D$(MACH)

2) Build the code with "make MACH=XXX"

3) Create the "Source/data" directory

4) Copy the "Source/input/s3d.in.XXX" file you want to "s3d.in"

5) Run "s3d_f90.x" from the "Source/run" directory with the number of processors given in s3d.in (npx * npy * npz)

All of the platform appeared to run properly. When we get some information on how to validate output, I can report about that.

Thanks, Alan